Send Message
Home > products > Sinter HIP Furnace >
320KVA 6MPA Sinter HIP Furnace For Precision Ceramics

320KVA 6MPA Sinter HIP Furnace For Precision Ceramics

320KVA Sinter HIP Furnace

Precision Ceramics Sinter HIP Furnace

6MPA Hot Isostatic Pressing Equipment

Place of Origin:


Brand Name:



CE;ISO9001;ISO14001;OHSAS 18001;GB/T29490

Model Number:


Contact Us
Request A Quote
Product Details
Service Life:
20 Years
Operating Times:
300 Times/year
Heating Power:
After Sales:
Engineer Can Be Dispached To Foreign Country To Finish The Installation And Commissioning Work
Warranty Period:
12 Months
Payment & Shipping Terms
Minimum Order Quantity
1 set
Packaging Details
Exempted from inspection wooden case
Delivery Time
100-120 work days
Payment Terms
L/C, T/T
Supply Ability
8 sets/month
Product Description

500*500*1200-6MPA Sinter-HIP Furnace for sintering of precision ceramics


Equipment function
Automatic positive and negative leak detection function
Ar carrier gas differential pressure dewaxing function
Hydrogen micro positive pressure dewaxing function
Vacuum sintering function
Ar partial pressure sintering function(Static and dynamic partial pressure)
Pressure sintering function
Rapid cooling function (built-in heat exchanger)
Automatic control function
Safety interlock function
Break point reheating function


Equipment system
It mainly includes control system, heating system, positive and negative pressure debinding system,vacuum system, pressure sintering system, cooling water system, rapid cooling system, safety system and auxiliary system.


Design standards
The precision ceramics sinter-HIP furnace is a single chamber and double door horizontal and periodic heating structure,which is designed for easy handling and maintenance, the whole process is controlled automatically.It can realize full load continuous operation, 300 furnace times/year or 300 working days/year.It uses graphite element resistance heating (low voltage, high current) .In addition, there are multiple heating units, each of which controls the temperature separately.It equipped with fully automatic control function and safety interlock function.The whole process is automatically controlled, monitored, tracked and recorded by computer.The PLC, industrial computer (PC) control to realize the whole process of one-key start, real-time dynamic monitoring, computer will save temperature, pressure, vacuum and other parameters ,alarm interlocking is safe and reliable.


General equipment requirements
Mainly used in precision ceramics dewaxing (Ar carrier gas dewaxing and hydrogen micro-positive pressure dewaxing), vacuum sintering, partial pressure sintering (static, dynamic), pressure sintering, rapid cooling and other processes.It meets the strict requirements of the uniformity of furnace temperature and atmosphere in the sintering process of cemented carbide, and the furnace structure design is advanced and reasonable, which is convenient for operation and maintenance.The main supporting components (control components, sensors, graphite heating element, thermocouple, main control valve, vacuum pump, etc.) have the international advanced level, can adapt to the long-term, stable, reliable mass production requirements.At the same time, the equipment meets the national requirements of energy conservation and environmental protection.



Technical parameters of equipment

Furnace shell design service

20 years

Furnace shell design operating time

6000 furnace/times

Valid working zone size(W*H*L)

Maximum loading capacity


(The load is dependent on the product type)


Maximum design temperature


( Heating up the furnace up to 2100℃ under vacuum sintering condition)


Maximum working temperature


(Under vacuum and pressurization condition)

Maximum design pressure 64bar
Maximum working pressure 58bar


Pumping speed

The vacuum degree can reach 5Pa within 30min after starting the pump.The ultimate vacuum value reaches 1Pa after reaching 5Pa and pumping for 30min (after drying, cold, empty, dry).


Leakage rate

≤3Pa/h (stop the pump group operation and start the test after the limit vacuum is measured after the oven, .Empty furnace, clean, cold state, within 3 hours average value).

Full furnace loading cooling time


When the inner furnace fully load materials,the cooling time of sintering temperature from 1450℃ to 100℃ is ≤6h(water temperature≤26℃,55bar≤pressure≤58bar)

Filling high pressure argon

Intermittent stable charging is adopted, charging time can be set.The system accurately matches the relationship between charging amount and time to ensure the following of charging.

Wax collect rate

≥98%(10Kg pure paraffin, argon negative pressure dewaxing.Maximum three mean values).

Pressurized time

The time of pressurization to 58Bar is ≤15min, which can be set (the gas source pressure is stable within the range of 80-100bar).


Uninterrupted power supply guarantee time



Power the indicator light and control the furnace during power off for more than 80 minutes.

Heating up speed

≤5℃/min(Under the condition of empty furnace)

Heating power

About 320KVA


320KVA 6MPA Sinter HIP Furnace For Precision Ceramics 0320KVA 6MPA Sinter HIP Furnace For Precision Ceramics 1

After sales

1. Installation, Commissioning and Acceptance

We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.

The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.


2. Training

When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)


3. Warranty period

The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.





Send your inquiry directly to us

Privacy Policy China Good Quality Sinter HIP Furnace Supplier. Copyright © 2019-2024 . All Rights Reserved.