5518-6MPa sinter-HIP furnace,a single chamber and double door horizontal and periodic heating structure,which is designe
Automatic positive and negative leak detection function
Ar carrier gas differential pressure dewaxing function
Hydrogen micro positive pressure dewaxing function
Vacuum sintering function
Ar partial pressure sintering function(Static and dynamic partial pressure)
Pressure sintering function
Rapid cooling function (built-in heat exchanger)
Automatic control function
Safety interlock function
The cemented carbide sinter-HIP furnace is a single chamber and double door horizontal and periodic heating structure,which is designed for easy handling and maintenance, the whole process is controlled automatically.It can realize full load continuous operation, 300 furnace times/year or 300 working days/year.It uses graphite element resistance heating (low voltage, high current) .In addition, there are multiple heating units, each of which controls the temperature separately.It equipped with fully automatic control function and safety interlock function.The whole process is automatically controlled, monitored, tracked and recorded by computer.The PLC, industrial computer (PC) control to realize the whole process of one-key start, real-time dynamic monitoring, computer will save temperature, pressure, vacuum and other parameters ,alarm interlocking is safe and reliable.
Furnace shell design service
Furnace shell design operating time
Valid working zone size(W*H*L)
|Maximum loading capacity||
(The load is dependent on the product type)
Maximum design temperature
( Heating up the furnace up to 1600℃ under vacuum sintering condition)
Maximum working temperature
(Under vacuum and pressurization condition)
|Maximum design pressure||100bar|
|Maximum working pressure||98bar|
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.