Easy maintain and extensive use sinter HIP furnace
It has different systems,such as control system,heating and insulation system,temperature measuring system,vacuum system, dewaxing system,atmosphere control system, cooling water system and so on.
|Design standards||JB4732-95/GB150/ASME,20-year service life,double doors horizontal structure,6000 times|
|Max.working Temp.||1600 ℃ (according to requirement of cumtomer,max.work temp. can be 1800 ℃ for special design )|
|Max.working pressure||100 bar|
|Vacuum leakage rate||3Pa/h(average in cold,empty,dry chamber in 24 hours )|
|Vacuum pump||Slide-valve pump,Roots Pump(Imported pump or domestic pump according to customer's requirement )|
|Pressurization period||15-30 min|
|Cooling period(full furnace)||3h/4h/≤ 5h|
|Temp.&Atmosphere Uniformity||Coercivity deviation ≤ ±0.3KA/M,Magnetic saturation deviation ≤ ±0.2%,Temperature variation ≤ ±5 ℃|
|Cooling water temp.||≤ 30 ℃|
|Cooling water flow rate||600L/min|
|Power supply||3*AC380V ±10 %+N +PE/50HZ|
|Control cabinet power supply||single-phase,AC210V-250V/50HZ|
|Temp.Measurement Mode||WRe5-26 Dual-core or Single-Core Thermocouple,mutually redundant,stable and reliable|
|Temp.Control Mode||Single-zone Temp.Control,3-zone Temp.Control or 4-zone Temp.Control|
|Functions||Vacuum heating,vacuum dewaxing,H2 dewaxing,heating flowing gas,heating with gas mixture (CO2,CH4,H2),heating pressure gas,Rapid cooling.|
|Furnace weight||≈20ton/ ≈24ton/ ≈34ton|
|Input Gas Allowed||Ar,H2,N2,CH4|
After sales service:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,
and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.