Send Message
Home > products > Gas Pressure Sintering Furnace >
Customizable Gas Pressure Sintering Furnace For Hard Metals Cermets PM Materials

Customizable Gas Pressure Sintering Furnace For Hard Metals Cermets PM Materials

Customizable Gas Pressure Sintering Furnace

PM Materials Pressure Sintering Furnace

120KVA Gas Pressure Sintering Furnace

Place of Origin:


Brand Name:



CE certificate, GB150, JB4732

Model Number:

100 bar/60bar/10bar

Contact Us
Request A Quote
Product Details
White, Gray, Black, Blue
Power Rating:
120KVA, 150KVA, 480KVA
Furnace Shell:
Carbon Steel
Heating Element:
Graphite, Carbon Felt
Furnace Vessel:
SS304/Carbon Steel
Payment & Shipping Terms
Minimum Order Quantity
1 set
USD 93,000-77,000,000
Packaging Details
Special wooden box
Delivery Time
5-8 months
Payment Terms
L/C, T/T
Supply Ability
7 sets / month
Product Description

Gas Pressure Sintering Furnace For Hard Metals/Cermets/PM Materials With Customizable Sintering Space

The horizontal design makes it easy to load & unload, as well as easy maintenance. The entire process is of automatic control with safety interlock. Full load continuous operation is realized with its maximum ability of 300 furnace times/year or 300 working days/year. Adopting graphite element resistance heating (low voltage, high current) with multiple heating units, each unit of temperature is individually controlled ; The whole process is controlled by computer automation, monitoring, tracking, fault self-diagnosis simulation display and record. The process is controlled by PLC and industrial control machine (IPC) to realize the one-key start-up of the whole process, real-time dynamic monitoring, temperature, pressure, vacuum and other parameters saving and reliable alarm interlock.

Process Step
1. Vacuum Dewaxing
2. H2-Dewaxing
3. Heating Vacuum (with/without pressure control)
4. Heating Partial Pressure Ar
6. Heating High Pressure Gas
7. Cooling High Pressure Gas



After sinterinng in RDE'S furnace, density, strength, durability and hardness of hard metals would improve a lot, meeting highest demands.

Sintering space 80-450L
Working temperature 1600℃(maximum working temperature)
1550℃(actual working temperature )


Pumping speed

The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa

(After drying the furnace, under the empty furnace, clean and cold state.)


Leakage rate


(Measuring the limit vacuum after drying the furnace, stop the operation of the pump group and start the test. Average within 3 hours in empty furnace, clean and cold state)


Cooling speed


Empty furnace. The cooling time of cooling temperature from 800℃ down to 100℃ just cost less or equal 3 hours.(water temperature≤28℃, 2bar≤water pressure≤3bar)


Cooling speed

The inner furnace is equipped with rapid cooling fan and cooling water realize rapid cooling.
Heating rod material Graphite
Temperature control mode Three zone temperature control independently
Heating up speed


Empty furnace heating up≤5℃



Heating power


It is about 120-480KVA


UPS guarantee time


It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes.

Send your inquiry directly to us

Privacy Policy China Good Quality Sinter HIP Furnace Supplier. Copyright © 2019-2024 . All Rights Reserved.