User-friendly Sinter Furnace (for cemented carbide, ceramics and other hard materials)
Main application:
For mass production of high-performance cemented carbide materials which gathered dewaxing (It can realize vacuum dewaxing,H2 dewaxing, binder can be paraffin or PEG),Vacuum sintering,,Low pressure Argon dynamic partial pressure sintering,High pressure Argon sintering, cooling, heat preservation and heating up under high temperature high pressure status
Service life |
6000times / 20-years service life |
Useful space |
≥300×300×600mm |
Max. Loading weight |
100kg(It depends on sintering product and loading space) |
Max. Designed temp. |
1600℃(Heating temperature) |
Max. Working temp. |
1550℃ |
Max. working pressure |
≤58bar |
Ultimate vacuum degree |
1Pa(After heating in a cold,empty,dry condition) |
Leakage rate (average value in 24h)
|
3pa/h(After testing ultimate vacuum,under empty cold,clean condition,test in average 24h) |
Wax Collection rate
|
≥98% (Argon or Nitrogen dewaxing with 10kg wax absolutely, average not more than 3 times ) |
Heating rate |
8°C/min (in the case of vacuum and empty furnace, the room temperature rises to 1450°C, 600°C, 1000°C, and 1200°C can be kept for 40 minutes half way), full furnace≤5°C/min |
Pressuring time
|
≤20min.Time can be set(When gas source is kept around 130bar,pressurized to required pressure) |
Cooling time
|
≤4 hours( From 1450℃ drop to 100℃ when fully-loaded,water temperature≤30℃,50bar≤pressure≤58bar ) |
UPS time
|
Supply power to indicator and to control furnace when power-off, Keeping time≥60min |
Temp.measurement Mode
|
Duplex core thermocouple,mutually redundant, stable and reliable |
Temperature control mode |
Single-zone temp. Control |
Input gas allowed |
Ar, N2, H2 |
Furnace Body weight |
10 T |
After sales:
1. Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
2. Training
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,
and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
Tips:
If you wonder how it works and relevant technical functions, please contact us and we will according your requirements make a technical project for your reference.We can also assist you with sintering furnace probelms.