Place of Origin:
China
Brand Name:
Ruideer
Certification:
CE certificate, GB150, JB4732
Model Number:
Customizable
Technical parameters
|
Valid working space |
Customizable |
|
Max working pressure |
10bar-100bar |
|
Cooling time (full load) |
Cooling time for sintering Temperature 1450℃～100℃: 7-8h (Empty furnace, water temperature≤26℃, 9.5bar≤pressure≤9.8bar) |
| Max.loading weight |
The load capacity depends on the product type |
|
Service life for furnace shell |
20 years |
|
Operating times for furnace shell |
6000 furnaces |
|
Max. Design Temperature |
1600℃ |
|
Max. Working Temperature |
1580℃ |
| Pumping speed |
The vacuum degree can reach 5Pa within 30min after starting the pump. After reaching 5Pa and then pumping for 60min, the ultimate vacuum value reaches 1Pa (within a cold, empty and clean furnace that has been dried before). |
| Leakage rate |
≤3Pa/h (stop the pump group operation and start checking after testing the limit vacuum (within a cold, empty and clean furnace that has been dried before). |
| Wax yield rate |
≥98%(10kg pure paraffin, argon negative pressure dewaxing. Measured by three times of mean values at most). |
|
UPS guarantee time |
It can power the indicator light and control the furnace during power outage for more than 80 minutes. |
| Max.heating rate |
8℃/min (the room temperature rises to 1580℃ within a vacuum and empty furnace. 600℃, 1000℃, 1200℃ half-way insulation is allowed). |
Send your inquiry directly to us
