Send Message
Home > products > Vacuum Sintering Furnace >
Automatic Leak Detection Debinding Sintering Furnace Vacuum Partial Pressure

Automatic Leak Detection Debinding Sintering Furnace Vacuum Partial Pressure

Partial Pressure Debinding Sintering Furnace

Automatic Leak Detection Vacuum Sintering Furnace

3pa/H Debinding Sintering Furnace

Place of Origin:

China

Brand Name:

Ruideer

Certification:

CE certificate, GB150, JB4732

Contact Us
Request A Quote
Product Details
Product Name:
Vacuum Sintering/ Debinding/Automatic Leak Detection/ Partial Pressure Sintering
Valid Working Space:
500mm×500mm×1800mm(W*H*L)
Max.loading Weight:
1500kg
Temperature:
1550℃-1600℃
Leakage Rate:
≤3Pa/h
Cooling Speed:
≤7h
Payment & Shipping Terms
Minimum Order Quantity
1 set
Price
Negotiable
Packaging Details
wooden box
Delivery Time
5-8 months
Payment Terms
L/C, T/T
Supply Ability
7 sets/month
Product Description

Vacuum Sintering/ Debinding/Automatic Leak Detection/ Partial Pressure Sintering

Technical parameters

 

Valid working space(W*H*L)

500mm×500mm×1800mm
Max.loading weight 1500kg(The load capacity depends on the product type)
Temperature 1600℃(Design maximum temperature)
1550℃(Actual working temperature)
Pumping speed

The vacuum degree can reach 5Pa within 30min after starting the pump. After reaching 5Pa and then pumping for 30min, the ultimate vacuum value reaches 1Pa (within a cold, empty and clean furnace that has been dried before).

Leakage rate

≤3Pa/h (stop the pump group operation and start checking after testing the limit vacuum (within a cold, empty and clean furnace that has been dried before).

Cooling speed

≤7h(full load,from 1450℃cooling down to 100℃,water temperature≤26℃,2 bar≤water pressure≤3bar)

Cooling mode

It's equipped with air cooler for rapid cooling that can also cool the furnace.

Power rating

About 400KVA (The output power can be limited)

Max.heating rate

8℃/min (the room temperature rises to 1450℃within a vacuum and empty furnace. 600℃, 1000℃, 1200℃ half-way insulation is allowed).

Wax yield rate

≥98%(10kg pure paraffin, argon negative pressure dewaxing. Measured by three times of mean values at most).

UPS guarantee time

It can power the indicator light and control the furnace during power outage for more than 80 minutes.

 

Atmosphere Uniformity in sintering zone

Positive pressure or negative pressure degreasing integration sintering uniformity:

 

furnace control piece (YC40 or YG6 particles) and paraffin forming agent are evenly distributed on the graphite boat.

 

*(The buyer shall provide the furnace control piece and program, and the seller shall confirm.)

 

Alnico: test cobalt magnetic field after dewaxing, deviation range: ≤±0.3%; Coercive force: deviation range: ≤± 0.4kA /M. The uniformity of furnace temperature is the standard of the uniformity of coercive force.

 

Send your inquiry directly to us

Privacy Policy China Good Quality Sinter HIP Furnace Supplier. Copyright © 2019-2024 sinterhipfurnace.com . All Rights Reserved.