Place of Origin:
China
Brand Name:
Ruideer
Certification:
CE;ISO9001;ISO14001;OHSAS 18001;GB/T29490
Model Number:
400*400*1500
4415 MIM vacuum debinding sintering furnace for sintering of stainless steel material
Equipment system:
It mainly includes control system,heating system,positive and negative pressure debinding system, vacuum system,cooling water system, rapid cooling system,safety system and auxiliary system.
Design standards:
The stainless steel pressure sintering furnace is a single chamber and double door horizontal and periodic heating structure,which is designed for easy handling and maintenance, the whole process is controlled automatically.It can realize full load continuous operation, 300 furnace times/year or 300 working days/year.It uses graphite element resistance heating (low voltage, high current) .In addition, there are multiple heating units, each of which controls the temperature separately.It equipped with fully automatic control function and safety interlock function.The whole process is automatically controlled, monitored, tracked and recorded by computer.The PLC, industrial computer (PC) control to realize the whole process of one-key start, real-time dynamic monitoring, computer will save temperature, pressure, vacuum and other parameters ,alarm interlocking is safe and reliable.
General equipment requirements:
The equipment is mainly used for stainless steel(MIM),debinding of cemented carbide (vacuum Ar carrier gas debinding and hydrogen micro-positive pressure debinding), vacuum sintering, partial pressure sintering, pressure sintering, rapid cooling and other processes.It can meets the strict requirement of uniformity of furnace temperature and atmosphere in sintering process of cemented carbide.The furnace structure design is advanced and reasonable, easy to use operation and maintenance.The main supporting components (control components, sensors, graphite heating element, thermocouple, main control valve, vacuum pump, etc.) have the international advanced level, can adapt to the long-term, stable, reliable batch production requirements.At the same time, the equipment meets the national requirements for energy conservation and environmental protection.
Technical parameters of equipment
|
Effective working zone size(W*H*L) |
400mm×400mm×1500mm |
|
Max.loading capacity |
500kg(it depends on the type of product) |
|
Working temperature |
1600℃(The maximum design temperature) |
| 1350℃(The actual working temperature) | |
|
Pumping speed |
The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa (After drying the furnace,under the empty furnace, clean and cold state) |
|
|
≤3Pa/h (Measuring the limit vacuum after drying the furnace, stop the operation of the pump group and start the test.Average within 3 hours in empty furnace, clean and cold state) |
|
Cooling speed |
The furnace is empty.From 1450℃ cooling to 100℃ will cost less than and equal to 6 hours.(Water temperature≤26℃,2bar≤Water pressure≤3bar) |
|
Cooling mode |
The inner furnace is equipped with rapid cooling fan and water cooling will cooling with the furnace. |
|
Heating element material |
Graphite |
|
Temperature control mode |
PID adjustment |
|
Heating power |
About 260KVA |
|
Wax collection rate |
≥98%(10kg paraffin refined wax ,Ar negative pressure debinding ,three averages at most |
|
Uninterrupted power supply guarantee time
|
It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes. |
After sale service
The warranty period of the equipment is 12 months.The warranty period shall start from the date when the supplier is qualified in installation and commissioning.After the equipment failure occurs, the after-sales service personnel shall put forward a solution within 2 hours after receiving the notice from the buyer, and those in urgent need of on-site treatment shall arrive at the site within 24 hours, and continuous repair shall be carried out until the fault is removed and the equipment completely returns to normal.
During the warranty period, the seller shall replace or repair the equipment free of charge for any loss or damage caused by the quality of the equipment itself.Non - quality problems, due to the demander negligence or improper operation caused by the fault.The buyer can contact the supplier, and the supplier can provide paid technical support.
Send your inquiry directly to us
