Vacuum degreasing and sintering integrated furnace, a single chamber, double door horizontal,periodic heating structure
General requirements of equipment:
Mainly used for carbide, ceramic materials, wear-resistant materials, high temperature alloy Ar, H2 carrier gas degreasing, vacuum sintering, partial pressure sintering (static, dynamic), vacuum cooling, rapid cooling and other processes.It meets the strict requirements of furnace temperature uniformity and atmosphere uniformity in the sintering process. The furnace structure design is advanced and reasonable, which is easy to use, operate and maintain.The main supporting components (control components, sensors, graphite heating element, thermocouple, main control valve, vacuum pump, etc.) have the current international advanced level, can adapt to the long-term, stable, reliable mass production requirements.At the same time, the equipment meets the national requirements of energy saving and environmental protection.
The vacuum degreasing sintering integrated furnace is a single chamber double door horizontal and periodic heating structure.The design is easy to load and unload and maintain, and the whole process is controlled automatically.Realize full load continuous operation, 300 furnace times/year or 300 working days/year.Graphite element resistance heating (low voltage, large current);With a plurality of heating units, each unit is independently controlled temperature;Automatic control function, safety interlock function, the whole process by computer automatic control, monitoring, tracking, fault self-diagnosis simulation display and record.PLC, industrial computer (PC) control to realize the whole process of a key start, real-time dynamic monitoring, computer to temperature, pressure, vacuum degree and other parameters, safe and reliable alarm interlock.
|Effective working size(W*H*L)||400mm×400mm×1200mm|
|Max. design temperature||1600℃|
|Actual working temperature||1550℃|
The vacuum degree can up to 5Pa within the 30 minutes of pump power on.
|Cooling speed||Empty furnace,1450℃ cooling down to 100℃≤6h (water temperature≤28℃,2bar≤water pressure≤3bar)|
|Cooling mode||Equipped with rapid cooling fan|
|Heating element material||Graphite|
|Temperature control mode||3 zone independence temperature control|
|Heating up speed||Full furnace heating up≤5℃|
|Heating power||abour 270KVA|
|Wax yield rate||≥98%|
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment,operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
We are a professional manufacturer of powder metallurgy sintering furnaces. Custom design is available according to customer’s requirements. Please offer us the sintered material, size of sintered piece, max. temperature, heating zone dimensions, vacuum level and other special requirements when making inquiries. We will offer professional proposal and solutions based on your requirements.
Quality assurance and service:
1. Our company guarantees that all materials and purchased components meet the national technical quality standards.
2. Within one year from the date of acceptance of the equipment, if there is any quality problem caused by the design or manufacture of the equipment, our company will carry out free maintenance and bear the maintenance cost.If the equipment exceeds the warranty period or is damaged due to human error or force majeure (such as natural disaster), our company will actively provide high-quality paid service.