High temperature vacuum furnace equipment is mainly used for vacuum sintering and quenching of cemented carbide, magnetic materials, ceramics and powder materials.
1. Widely used in ceramics, metallurgy, electronics, glass, chemical industry, machinery, refractory materials, new material development, special materials, building materials, universities, research institutes, industrial and mining enterprises for powder roasting, ceramic sintering, high temperature experiment, material treatment, quality testing, etc.
2. Furnace body: it is made of carbon steel by precise machining equipment. The double-layer design has an air duct in the middle, so that the surface temperature is close to room temperature.
3. Appearance: High temperature baking process is adopted to match the two colors to make the appearance beautiful and generous. (Spraying can also be done according to the customer's color requirements.)
4. Temperature control: The intelligent electronic control system is composed of temperature controller, trigger module and electric appliances by domestic famous brands, ensuring high control accuracy, long service life and easy operation.
5. Transformer: Fully insulated transformer with copper coil winding, low calorimeter, low noise and long service life (limited to silicon and molybdenum bar heating elements)
6. Heating element: high quality heating element, uniform heating, smooth surface, long service life and other characteristics
7, thermocouple: using national standard thermocouple, high degree, long service life.
8. Refractory material: the ceramic fiber furnace is composed of light ceramic fiber material, which has low heat transfer energy, good heat preservation effect and special construction method, so that the service life of the furnace is long.
9. Heat preservation material: high aluminum, general aluminum, aluminum silicate aluminum filling cotton, heat preservation of the furnace, so that the furnace temperature loss less, further achieve energy saving effect.
10, sealing furnace lining using 304 stainless steel metal flange, silicone rubber seal, screw or quick flange two sealing ways, to ensure that the furnace pipe good sealing.
Available working zone size(W*H*L)
|Working temperature||1600℃(maximum working temperature)|
|1550℃(actual working temperature )|
The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa
(After drying the furnace,under the empty furnace, clean and cold state.)
|The inner furnace is equipped with rapid cooling fan and cooling water realize rapid cooling.|
|Heat rod material||Graphite|
Heating up speed
|Empty furnace heating up≤5℃|
Uninterrupted power supply guarantee time
|It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes.|
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
We are a professional manufacturer of powder metallurgy sintering furnaces. Custom design is available according to customer’s requirements. Please offer us the sintered material, size of sintered piece, max. temperature, heating zone dimensions, vacuum level and other special requirements when making inquiries. We will offer professional proposal and solutions based on your requirements.
Quality assurance and service:
1. Our company guarantees that all materials and purchased components meet the national technical quality standards.
2. Within one year from the date of acceptance of the equipment, if there is any quality problem caused by the design or manufacture of the equipment, our company will carry out free maintenance and bear the maintenance cost.If the equipment exceeds the warranty period or is damaged due to human error or force majeure (such as natural disaster), our company will actively provide high-quality paid service.