Tungsten-cobalt alloy, high specific gravity alloy, titanium alloy special pressure sintering furnace
Vented Gas Furnace Main configuration:
◆ Heater material: isostatic graphite / molded three high graphite
◆ Mafu material: graphite particles can be selected by customers
◆ Gas path control: volume / mass flow meter; manual valve / automatic valve; imported / domestic
◆ Vacuum pump and vacuum gauge: imported / domestic
◆ Material truck: fully automatic loading and unloading trolley
◆ Operation panel: industrial computer / support touch and mouse operation
◆ PLC: Siemens
◆ Thermocouple: Wre5-26 (tungsten sleeve / molybdenum sleeve / ceramic sleeve)
◆ Electrical components: Schneider / Siemens
Gas pressure sintering furnacePower supply:General standard is three phase five wire system AC380V±10% 50HZ.Control power supply:Single-phase AC210V-250V 50HZ design(Different countries and regions can be designed according to local grid standards).
Gas pressure sintering furnaceTemperature and atmosphere uniformity:The magnetic force of the furnace control block is different from that of the cobalt magnetic deviation.Conventional sintering furnace test furnace control block brand isYG6 medium particles, YC40.Debinding pressure sintering integrated.
Vented Gas Furnace Technical parameters:
| Specifications | RDE-DYL-336/RDE-DYL-339 | RDE-DYL-3535120/RDE-DYL-4412 | RDE-DYL-5512/RDE-DYL-5518 | RDE-DYL-5527 |
| Effective space(w* h * l)mm |
300*300*600/ 300*300*900 |
350*350*1200/ 400*400*1200 |
500*500*1200/ 500*500*1800 |
500*500*2700 |
| Max.Temperature | 1600℃ | 1600℃ | 1600℃ | 1600℃ |
| Maximum load | 150Kg/200Kg | 300Kg/350Kg | 1200Kg/1500Kg | 2000Kg |
| Vacuum leakage rate:(Average in cold,empty,dry chamber in 3 hours) | 2Pa/h | 2Pa/h | 3Pa/h | 3Pa/h |
| Extreme vacuum | 0.8Pa | 0.8Pa | 1Pa | 1.5Pa |
| Wax-collection rate(negative pressure dewaxing process.The maximum average value is 3 furnaces) | 98% | 98% | 98% | 98% |
| Working pressure |
1MPa/2MPa/ 6MPa/10MPa |
1MPa/2MPa/ 6MPa/10MPa |
1MPa/2MPa/ 6MPa/10MPa |
1MPa/2MPa/ 6MPa/10MPa |
| Cooling period(Sintering temperature—100℃) | 40min-150min | 120min-360min | 180min-420min | 180min-480min |
| Temperature control mode | 2-zone/3-zone | 2-zone/3-zone | 3-zone/4-zone | 4-zone |
| Atmosphere and temperatureuniformity |
Com≤±0.15% Hc≤±0.25KA/M |
Com≤±0.2% Hc≤±0.3KA/M |
Com≤±0.2% Hc≤±0.3KA/M |
Com≤±0.2% Hc≤±0.3KA/M |
| Input gas allowed | Ar,N2,He,H2,CH4,Co2 | |||
| Functions:Vacuun dewaxing,H2 dewaxing,vacuum heating,heating with gas mixture(Co2/CH4/H2),heating flowing gas,heating pressure gas,Rapid cooling. | ||||
Our products are sold all over the world, you can rest assured.
