Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd 86--16673365810 shirley.xiao@zzrde.com
Optimal Performance Gas Pressure Sintering Furnace For  Hard metals, Cermets and other PM-materials

Optimal Performance Gas Pressure Sintering Furnace For Hard metals, Cermets and other PM-materials

  • Color
    White, Gray, Black, Blue
  • Power Rating
    120KVA, 150KVA, 480KVA
  • Furnace Shell
    Carbon Steel
  • Heating Element
    Graphite, Carbon Felt
  • Place of Origin
    China
  • Brand Name
    Ruideer
  • Certification
    CE certificate, GB150, JB4732
  • Model Number
    100 bar
  • Minimum Order Quantity
    1 set
  • Price
    USD 93,000-77,000,000
  • Packaging Details
    Special wooden box
  • Delivery Time
    5-8 months
  • Payment Terms
    L/C, T/T
  • Supply Ability
    7 sets / month

Optimal Performance Gas Pressure Sintering Furnace For Hard metals, Cermets and other PM-materials

RDE Intelligent Gas Pressure Sintering Furnace with Cloud-control Platform

Using latest technologies results in the improved and lasting quality of the sintering products. Substantial savings in process time leads to much higher productivity and cost reduction.

Strength of a material is its ability to withstand this applied load without failure or plastic deformation. For tensile stress, the capacity of a material or structure to withstand loads tending to elongate is known as ultimate tensile strength (UTS). Yield strength or yield stress is the material property defined as the stress at which a material begins to deform plastically whereas yield point is the point where nonlinear (elastic + plastic) deformation begins. In case of tensional stress of a uniform bar (stress-strain curve), the Hooke’s law describes behaviour of a bar in the elastic region. The Young’s modulus of elasticity is the elastic modulus for tensile and compressive stress in the linear elasticity regime of a uniaxial deformation and is usually assessed by tensile tests.

After sinterinng in RDE'S furnace, density, strength, durability and hardness of hard metals would improve a lot, meeting highest demands.

Sintering space 80-450L
Working temperature 1600℃(maximum working temperature)
1550℃(actual working temperature )

 

Pumping speed

The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa

(After drying the furnace, under the empty furnace, clean and cold state.)

 

Leakage rate

≤3Pa/h

(Measuring the limit vacuum after drying the furnace, stop the operation of the pump group and start the test. Average within 3 hours in empty furnace, clean and cold state)

 

Cooling speed

 

Empty furnace. The cooling time of cooling temperature from 800℃ down to 100℃ just cost less or equal 3 hours.(water temperature≤28℃, 2bar≤water pressure≤3bar)

 

Cooling speed

The inner furnace is equipped with rapid cooling fan and cooling water realize rapid cooling.
Heating rod material Graphite
Temperature control mode Three zone temperature control independently
Heating up speed

 

Empty furnace heating up≤5℃

 

 

Heating power

 

It is about 480KVA

 

UPS guarantee time

 

It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes.